Screw Type Weighing Feeder and Pellet Screening System
KUBOTA Feeder are mostly usded in the modified plastics field, which is featured by precise feeding. It is mainly used in the extruder to process multiple materials at the same time.
KUBOTA SUPERIOR PLATON can catch contaminant even as 0.1mm. Advanced screening technology improves product quality perfectly. The platon, already well-received as an in-line resin pellet removing system, has now been upgraded and newly introduced as the PLATON2. With the number of line sensor camera pixels increased to 5000, sorting out black soptted pellat as small as 0.1 mm is now possible. Flow rate capacity and operability have been improved as well. According to material, sensitivity can also be adjusted.
Injection Molding Machine Based on high accuracy and stable molding by V-LINE®, Developed
Sodick Enterprise(S.Z.) Co; Ltd
Based on high accuracy and stable molding by V-LINE®, Electric V-LINE® is developed. The injection and plasticizing apparatus with V-LINE® system, with enhanced function to ensure precise reproducibility, is now powered by a servomotor. Measurements and positioning data for the injection locations are controlled in a closed loop to improve the precision of positioning, achieving remarkably stable repetitions of the plasticizing, measuring, and injection cycle. The line of injection units with plungers of 28 mm and 40 mm in diameters include models that emphasize speed and models that emphasize pressure, allowing users to choose the unit that best suits the molded product type. Electric clamping action with servo motor drive and adoption of the mold clamping device by the original toggle link mechanism shortened the mold opening and closing cycle. The movable platen is supported by a linear guide to improve the stability of the mold orientation. The power design for these products significantly reduces power usage while contributing to quieter operation. Operation panel focused on intuition. Offering selector type switches, the control panel has been developed especially for the MS100. The ability to move the switches in the same direction in which users want each unit to move results in a more intuitive operating experience and helps simplify molding operations.
Independent Arm Secondary Slitter for Lithium Ion Battery Film
FUJI TEKKO CO LTD
Performance: wind randomly from width 35mm to width 300mm; contact winding and gap winding can be chosen; individual tension and contact pressure of each independent winding arm can be set; independent arms move horizontally and avoid the influence caused by product weight; the winding path length remain the same and make the end face of the product clear.
End-product: Ceramic Coated Lithium-ion Separator Film and the slitter is equipped with special dust suction devices.
Mold cleaning machine for optical components Mold cooling tube cleaning machine
Newish Technology Co.,Ltd
1. The Mold cleaning machine completely removes all corrosive substances adhered to molds and restores molds to their original metallic color in a short time, regardless of the quantity, shape or surface area of the molds.
2. Cleans multiple molds at the same time. It shortens the time reduced the steps needed for cleaning, while frequency of molding cleaning can also be reduced. Productvity of molding machine can be enhanced.
3. Mainly for precision injection molding applications, such as automobile industry, medical industry, optical industry, etc.
Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding.
The AL series machine developed by Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mould bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mould and the investment cost in the production are greatly reduced.
thermoplastic carbon fiber prepreg
Teijin has developed its own carbon fiber and thermoplastic resin such as PC (own), PES, PP, etc. to develop a thermoplastic carbon fiber prepreg, flame-resistant, impact-resistant, room temperature storage, suitable for large-scale mass production (production cycle time is short) Dip. The product is easy to mold, has a good appearance, can be recycled, and has low comprehensive cost. It can replace metal and thermosetting prepreg, and is widely used in many fields such as automobiles, electronic appliances, construction, and medical. The product can also be customized according to the various needs of different customers, providing customers with a comprehensive set of comprehensive solutions.
Asahikasei‘s EV-Concept vehicle
The concept car utilizes the electric vehicle platform of GLM to achieve a drivable design.The car is named
「AKXY」 which comes from Asahi Kasei X (multiplied by) You (the customer).It is equipped with a wide variety of Asahi Kasei materials, components, and systems, numbering 27 products in all, most of them available for adoption in mass-produced vehicles, including engineering plastics to replace metal and enable vehicle weight reduction, artificial suede for seats with superior comfort, and an in-car communication system utilizing various speech-processing technology.
New DURANEX® PBT Provides Excellent Alkali Stress Crack Resistance for Automotive Market
Polyplasatics' DURANEX® 532AR is ideal for use in parts installed in the chassis section and lower areas of vehicles which can be splashed by water and mud, and come into contact with chemicals such as snow melting agents. This grade offers a combination of high reliability and long life even in harsh environments. As the demands for durability, safety, and reliability in auto parts continue to increase, DURANEX 532AR not only reduces stress cracking from alkaline substances but also includes measures to counteract heat shock fracture and the weakness of PBT resin to hydrolysis. This grade offers a combination of high reliability and long life even in harsh environments for resins such as around the chassis section and inside the engine room of cars.
Super Tough PPS Compound
Tosoh has developed the high performance PPS (SUSTEEL®) which shows outstanding strength and moldability.
1) High weld strength
2) Excellent thermal shock resistance
3) Low gas, mold staining
By optimizing PPS polymer, other compounding ingredients and compounding process, it has become possible to achieve improvement of above strength; performance of Tosoh's new material is twice better than conventional product in thermal shock resistance. This would be useful in the insert molding.
On the other hand, decreasing gas and mold staining are also accomplished, which help customers reduce the frequency of mold maintenance and the trouble of voids or poor appearance.
High performance the new PPS material can contribute to the development of automotive, water section, electric and electronic fields.
NO-alkyl type HALS: ADK STAB LA-81
ADEKA (CHINA) CO.,LTD.
ADKSTAB LA81 is the NO-alkyl type HALS for PE and PP. ADKSTAB LA81 has excellent solubility to PE/PP and low basicity compared with conventional HALS. Suitable application of ADKSTAB LA81 is agricultural films because it possess excellent light stability under acidic conditions.