Chinaplas
Machine / Mold Exhibits Checking Form ( for Hall 2.2 / 5.2 only )
A. Company and contact information
Company Name
Proposed Booth No.
Fill in the entire booth number (i.e. the hall number and the booth number, e.g. 2.2A01)
*Contact Person
*Tel
(No need to input '0' before country code and area code. e.g. 86 21 12345678)
*Email
B. Exhibits Information / Specification
**Important reminder notes, please read it carefully before fill in:
1. Item 1 to 6 are compulsory to fill in.
2. This Form is for feasibility checking of machine / mold exhibits could be placed at the proposed booth location. After booth is confirmed, exhibitors are still required to submit Machine / Mould Exhibit Information.
3. This is not an order form. Exhibitors who need to place orders shall complete Electrical Items / Furniture / Other Items Order Form from the Official Standfitting Contractor. Availability of the supply is subject to the technical feasibility.
**Quantity of machinery to be exhibited
1. Floor Loading and Size of Machine / Mold Exhibits (Please provide machine photos for reference)
SerialNo. Machine / Mold Exhibits Name Length (m) Width (m) Height (m) Weight (ton) Floor Loading of Machine (tons/sqm)
Limit maximum 1.5 tons/sqm		 Does the machine move vertically? Upload Image
Static (tons/sqm) Dynamic (tons/sqm) YES NO
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
Upload Image
2. Highest Point of Machine Exhibits (after assembly or while running)
*Overall height of exhibits after assembly
limit: Exhibits up to 7 meters
*Maximum height of exhibits in operation
3. Overall Size and Weight of Lorry and Machine / Mold Exhibits (Overall Size within 12.5m(L) x 2.5m(W) x 4m(H) (including vehicle head), gross Weight under 20 tons)
4. Electricity Requirement of Machine / Mold Exhibits
SerialNo. Machine / Mold Exhibits Name Not Required Need electricity supply, single electricity power main can’t exceed 250Amp, and total electricity consumption can’t exceed 600Amp (including lighting and machinery power)
Current (A) Voltage (V) Power (KW)
5. Water Requirement of Machine / Mold Exhibits
SerialNo. Machine / Mold Exhibits Name Not Required Required
In and out water
Water pressure ≤ 2kg/cm²		 Other specifications #Water circulation required Water Circulation Equipment
Upload Image
Pipe inner diameter (mm) Water pressure(kg/cm²)
Inlet/outlet
15mm/25mm dia		 Inlet/outlet
20mm/25mm dia		 Inlet pipe Outlet pipe
Notes:
* Any equipment causing overflow is prohibited to place inside halls. Exhibitors who bring their own water container or other cooling system should get the approval from the Official Standfitting Contractor and the equipment must be placed inside the booth, be well-covered and prevented from water leakage.
* Draining or releasing waste water, sewage or water with above-normal temperature is prohibited.
# Please provide the specifications, photos and the operating procedure of self bring water tank or other cooling system.
6. Compressed Air Requirement Machine / Mold Exhibits
SerialNo. Machine / Mold Exhibits Name Not Required Required
Press : 8kg / 8 bar Other specifications
≤0.4m³/min
φ15mm		 ≤0.9m³/min
φ20mm		 =1.0m³/min
φ25mm		 Pipe inner diameter (mm) Pressure（kgf/cm², BAR, PSI） Flux（m³/min）