Result:456
Sourcing Requests
You are welcome to post your sourcing requests here. Our professional team will match the best-suited suppliers / products within 2-5 working days according to your requirement, so that you can contact the suppliers directly.
AX147
Buyer from PR China
Regular / Long term request
Looking for:
(PBT) Polybutylene terephthalate
Details:
需要PBT+GF30原料生产汽车挡风玻璃支架,要求防翘曲,由于零件较大,需要防翘曲性能要好
Quantity:
25kg
Application:
原材料/汽车行业
 2  supplier(s) requested for matching.
AS900
Buyer from PR China
Regular / Long term request
Looking for:
(PBT) Polybutylene terephthalate
Details:
1.PBT+GF30需要防翘曲
2.性能确保防翘曲 3.生产汽车挡风玻璃后视镜底座 4.目标市场:汽车行业
2.性能确保防翘曲 3.生产汽车挡风玻璃后视镜底座 4.目标市场:汽车行业
Application:
汽车
 3  supplier(s) requested for matching.
AD495
Buyer from PR China
Urgent request
Looking for:
Films & membranes
Details:
1.保护膜主要特性是易撕易断,撕开后边缘相对齐整
2.产能:一年130w张的量左右 3.主要应用在vcm和pcm覆膜,尺寸在900mmx600mm左右,细分的话就比较多了 4.厨电市场 5.最好不超过3元/平 目前冰箱行业应该有在应用的,在vcm划膜未划透的情况下撕膜
2.产能:一年130w张的量左右 3.主要应用在vcm和pcm覆膜,尺寸在900mmx600mm左右,细分的话就比较多了 4.厨电市场 5.最好不超过3元/平 目前冰箱行业应该有在应用的,在vcm划膜未划透的情况下撕膜
Application:
厨电行业
 3  supplier(s) requested for matching.
AN106
Buyer from PR China
Regular / Long term request
Looking for:
(TPE) Thermoplastic Elastomers, Additives, Colour pigments
Details:
医疗级TPU母粒滑剂
Application:
医疗
 3  supplier(s) requested for matching.
AG604
Buyer from PR China
Regular / Long term request
Looking for:
Others
Details:
用于高分子材料表面的润滑、脱模。
Quantity:
10吨
Application:
高分子材料加工
 3  supplier(s) requested for matching.
AR259
Buyer from PR China
Urgent request
Looking for:
(Bio-PP) Biobased polypropylene, Other Biobased plastics, Bioplastics, cellulose based, Biodegradable plastics
Details:
生物基 甘蔗塑料
Application:
塑料行业,低碳可降解生物基塑料(甘蔗渣)
 3  supplier(s) requested for matching.
AC889
Buyer from PR China
Regular / Long term request
Looking for:
Recycled Plastics
Details:
有GRS认证的再生料
Application:
膜类
 4  supplier(s) requested for matching.
AI667
Buyer from PR China
One-time request
Looking for:
Other additives
Details:
PA成核剂
Application:
Pa
 3  supplier(s) requested for matching.
AM568
Buyer from PR China
Regular / Long term request
Looking for:
(PE) Polyethylene
Details:
I am looking for virgin HDPE resin pellets suitable for:
1) Injection mould grade, melt index: min. 20g/10min, density: min. 0.953g/cm³, tensile strength: min. 3400 PSI, flexural modulus: min. 140,000 PSI 2) Blow mould grade, melt index: max. 0.35g/10min, density: min. 0.952g/cm³, tensile strength: min. 4000 PSI, flexural modulus: min. 180,000 PSI Packaging: 25kg bags Export: Brazil
1) Injection mould grade, melt index: min. 20g/10min, density: min. 0.953g/cm³, tensile strength: min. 3400 PSI, flexural modulus: min. 140,000 PSI 2) Blow mould grade, melt index: max. 0.35g/10min, density: min. 0.952g/cm³, tensile strength: min. 4000 PSI, flexural modulus: min. 180,000 PSI Packaging: 25kg bags Export: Brazil
Quantity:
Total quantity: 1* 40GP container (approx. 25 MT)
Application:
Plastic production
 5  supplier(s) requested for matching.
AM087
Buyer from
Urgent request
Looking for:
Glass fibers
Details:
耐高温材料、500度,处于研发阶段,可推荐国外为主的供应商。需要实用性,如需采购再看结果。
Application:
家电及电子产品
 2  supplier(s) requested for matching.
AJ816
Buyer from PR China
Regular / Long term request
Looking for:
(ABS) Acrylonitrile/ butadiene/ styrene copolymers, (PP) Polypropylene, (PS) Polystyrene, (PVC) Polyvinyl chloride, (PMMA) Polymethylmethacrylate
Details:
材料特性:对蛋白的高吸附性(ABS PS PVC)
对蛋白的低吸附性(PP PMMA)
对蛋白的低吸附性(PP PMMA)
Application:
医疗
AU442
Buyer from PR China
Regular / Long term request
Looking for:
(PP) Polypropylene
Details:
韩国晓星PP R200P
Quantity:
月用量60吨 年用量800吨
Application:
管材
AP778
Buyer from Iran
Regular / Long term request
Looking for:
(PPS) Polyphenylene sulfide
Details:
8 tons of pps material
Application:
Automobile
AA495
Buyer from Hong Kong, China
Regular / Long term request
Looking for:
Rubbers
Details:
朗盛EVM 700XL
Application:
低烟无卤改性料
AL070
Buyer from Malaysia
Urgent request
Looking for:
Antifoam agents
Details:
Antifoam/ Desiccant
25kg/box , 5kg/bag, vacuum packed
25kg/box , 5kg/bag, vacuum packed
Application:
FIlm/Injection
 2  supplier(s) requested for matching.
AI427
Buyer from PR China
Regular / Long term request
Looking for:
(PS) Polystyrene foams, (EPS) Expandable polystyrene
Details:
PS泡沫颗粒
Application:
PS材料
AO382
Buyer from PR China
Regular / Long term request
Looking for:
Pearlescent pigments
Details:
PE珠光 月用2吨
Application:
色母粒
 2  supplier(s) requested for matching.
AZ071
Buyer from PR China
Regular / Long term request
Looking for:
Light / UV stabilizers, Antioxidants
Details:
PVC中添加,需要做到抗氧化与发黄
Application:
挤塑
 6  supplier(s) requested for matching.
AD570
Buyer from Iran
Regular / Long term request
Looking for:
Azo pigments, Carbon black, Colour pigments, Colourants, Daylight fluorescent pigments, Dyestuffs, soluble, Iron oxide pigments, Effect pigments, Pearlescent pigments, Phthalocyanine pigments
Details:
Pigments:
R57:1 8mt
Y.12. 12mt
Y.13. 2mt
O.13 5mt
O.34 1mt
R.112 2mt
R.146. 3mt
R.2 8mt
R.53:1 2mt
R.31 2mt
B.15:0 6mt
V.23 1mt
Black 7 7mt
Application:
Pigments
 2  supplier(s) requested for matching.
AG174
Buyer from Brazil
Regular / Long term request
Looking for:
Thermoplastics
Details:
PBS for injection molding.
Application:
Autimotive
 2  supplier(s) requested for matching.
AJ810
Buyer from PR China
Urgent request
Looking for:
Molds & Dies, Machine vision systems
Details:
LSR 人体植入模具,LSR+TPU,0.2g, overmolding,重点要求熟悉 Microsystem,Manner, Elmet以及部分欧美知名品牌微型注塑模具,冷流道
Quantity:
20
Application:
医疗,微型注塑,硅胶
AP503
Buyer from Egypt
One-time request
Looking for:
Printing equipment for plastic & rubber products
Details:
I am Ehab younis from Egypt my work is packaging research & development and I research felxo printing machie. as I see in your page there is a machine it's speed about m/m I need width not than one meter and print paper and film also I need to know the all specification about the machine kindly also i need to know the price at last could you send more than machine to be have more than chance to choose the suitable machine. at last I wish it's a good starting to successful new job and i looking forward quick replay.
Quantity:
1) machine speed more than m/m 250 2) we need 6 color machine
Application:
packaging research & development
 2  supplier(s) requested for matching.
AF878
Buyer from
Urgent request
Looking for:
(TPE) Thermoplastic Elastomers, (EPP) Polypropylene-foams
Details:
聚丙烯微孔发泡材料,替代珍珠棉,隔层板使用。
1.描述 PP/SC-CO2 挤出物理发泡片/板,简称 XPP 片/板,是以聚丙烯(PP)为原料,用 二氧化碳作为发泡剂,物理挤出发泡制得的产品。其密度控制在 0.10-0.70 g/cm3 ,厚度 1~20 毫米,具有优异的热稳定性(最高使用温度达 110℃)和高温下制品的尺 寸稳定性,有适宜和柔顺的表面,优异的微波适应性以及易回收性,极佳的可二 次加工性。 2.成分 聚丙烯树脂、CO2。 3.特性 轻质高强 清洁环保 良好的缓冲保护性能 良好的表面保护性能 良好的防水性能 良好的绝热保温性能 良好的耐化学特性 可循环使用 4. 性能(是个pdf文档,表格,就不好上传)
1.描述 PP/SC-CO2 挤出物理发泡片/板,简称 XPP 片/板,是以聚丙烯(PP)为原料,用 二氧化碳作为发泡剂,物理挤出发泡制得的产品。其密度控制在 0.10-0.70 g/cm3 ,厚度 1~20 毫米,具有优异的热稳定性(最高使用温度达 110℃)和高温下制品的尺 寸稳定性,有适宜和柔顺的表面,优异的微波适应性以及易回收性,极佳的可二 次加工性。 2.成分 聚丙烯树脂、CO2。 3.特性 轻质高强 清洁环保 良好的缓冲保护性能 良好的表面保护性能 良好的防水性能 良好的绝热保温性能 良好的耐化学特性 可循环使用 4. 性能(是个pdf文档,表格,就不好上传)
Application:
电子
 4  supplier(s) requested for matching.
AG890
Buyer from United States of America
Urgent request
Looking for:
Injection molding machines, general purpose, Injection molding machines, multi-component, Injection molding machines, multi-station, Other injection molding machines
Details:
Mold and Injection Molding machines - electric type , qty 4 - High efficiency
Application:
PRODUCTION OF ELECTRCAL BXOES AND ACCESSORIES FOR USA MARKET
 6  supplier(s) requested for matching.
AZ152
Buyer from PR China
Regular / Long term request
Looking for:
(TPE) Thermoplastic Elastomers
Details:
TPU
Application:
鞋材
AG051
Buyer from PR China
Regular / Long term request
Looking for:
Solid lubricants, Waxes, Lubricants
Details:
树脂,EBS等添加剂
Application:
色母粒生产
 4  supplier(s) requested for matching.
AT967
Buyer from PR China
Regular / Long term request
Looking for:
Foaming / blowing agents, Processing auxiliaries, Heat stabilizers, Catalysts & accelerators
Details:
稳定剂、促进剂、钙粉,增白剂,钛白粉,发泡剂
Application:
PVC壁纸
 4  supplier(s) requested for matching.
AS780
Buyer from Malaysia
Regular / Long term request
Looking for:
Colour masterbatches, (ABS) Acrylonitrile/ butadiene/ styrene copolymers, (PP) Polypropylene
Details:
PP/ABS. General modified plastics, replacement for ABS757
Quantity:
2000 tonnes per year
Application:
Home appliances
 5  supplier(s) requested for matching.
AZ198
Buyer from Pakistan
Regular / Long term request
Looking for:
(PP) Polypropylene
Details:
Looking for 60+ MFI Polypropylene suitable for thin wall injection moulding. Please share your offers CFR Karachi terms
Quantity:
100MT/Month
Application:
Thin Wall Injection Moulding
 4  supplier(s) requested for matching.
Buyer from PR China
Regular / Long term request
Type:
(PBT) Polybutylene terephthalate
Details:
需要PBT+GF30原料生产汽车挡风玻璃支架,要求防翘曲,由于零件较大,需要防翘曲性能要好
2023-06-05
Buyer from PR China
Regular / Long term request
Type:
(PBT) Polybutylene terephthalate
Details:
1.PBT+GF30需要防翘曲
2.性能确保防翘曲 3.生产汽车挡风玻璃后视镜底座 4.目标市场:汽车行业
2.性能确保防翘曲 3.生产汽车挡风玻璃后视镜底座 4.目标市场:汽车行业
2023-06-05
Buyer from PR China
Urgent request
Type:
Films & membranes
Details:
1.保护膜主要特性是易撕易断,撕开后边缘相对齐整
2.产能:一年130w张的量左右 3.主要应用在vcm和pcm覆膜,尺寸在900mmx600mm左右,细分的话就比较多了 4.厨电市场 5.最好不超过3元/平 目前冰箱行业应该有在应用的,在vcm划膜未划透的情况下撕膜
2.产能:一年130w张的量左右 3.主要应用在vcm和pcm覆膜,尺寸在900mmx600mm左右,细分的话就比较多了 4.厨电市场 5.最好不超过3元/平 目前冰箱行业应该有在应用的,在vcm划膜未划透的情况下撕膜
2023-06-02
Buyer from PR China
Regular / Long term request
Type:
(TPE) Thermoplastic Elastomers, Additives, Colour pigments
Details:
医疗级TPU母粒滑剂
2023-06-01
Buyer from PR China
Regular / Long term request
Type:
Others
Details:
用于高分子材料表面的润滑、脱模。
2023-05-30
Buyer from PR China
Urgent request
Type:
(Bio-PP) Biobased polypropylene, Other Biobased plastics, Bioplastics, cellulose based, Biodegradable plastics
Details:
生物基 甘蔗塑料
2023-05-30
Buyer from PR China
Regular / Long term request
Type:
Recycled Plastics
Details:
有GRS认证的再生料
2023-05-30
Buyer from PR China
One-time request
Type:
Other additives
Details:
PA成核剂
2023-05-29
Buyer from PR China
Regular / Long term request
Type:
(PE) Polyethylene
Details:
I am looking for virgin HDPE resin pellets suitable for:
1) Injection mould grade, melt index: min. 20g/10min, density: min. 0.953g/cm³, tensile strength: min. 3400 PSI, flexural modulus: min. 140,000 PSI 2) Blow mould grade, melt index: max. 0.35g/10min, density: min. 0.952g/cm³, tensile strength: min. 4000 PSI, flexural modulus: min. 180,000 PSI Packaging: 25kg bags Export: Brazil
1) Injection mould grade, melt index: min. 20g/10min, density: min. 0.953g/cm³, tensile strength: min. 3400 PSI, flexural modulus: min. 140,000 PSI 2) Blow mould grade, melt index: max. 0.35g/10min, density: min. 0.952g/cm³, tensile strength: min. 4000 PSI, flexural modulus: min. 180,000 PSI Packaging: 25kg bags Export: Brazil
2023-05-24
Buyer from
Urgent request
Type:
Glass fibers
Details:
耐高温材料、500度,处于研发阶段,可推荐国外为主的供应商。需要实用性,如需采购再看结果。
2023-05-24
Buyer from PR China
Regular / Long term request
Type:
(ABS) Acrylonitrile/ butadiene/ styrene copolymers, (PP) Polypropylene, (PS) Polystyrene, (PVC) Polyvinyl chloride, (PMMA) Polymethylmethacrylate
Details:
材料特性:对蛋白的高吸附性(ABS PS PVC)
对蛋白的低吸附性(PP PMMA)
对蛋白的低吸附性(PP PMMA)
2023-05-23
Buyer from PR China
Regular / Long term request
Type:
(PP) Polypropylene
Details:
韩国晓星PP R200P
2023-05-23
Buyer from Iran
Regular / Long term request
Type:
(PPS) Polyphenylene sulfide
Details:
8 tons of pps material
2023-05-23
Buyer from Hong Kong, China
Regular / Long term request
Type:
Rubbers
Details:
朗盛EVM 700XL

2023-05-23
Buyer from Malaysia
Urgent request
Type:
Antifoam agents
Details:
Antifoam/ Desiccant
25kg/box , 5kg/bag, vacuum packed
25kg/box , 5kg/bag, vacuum packed
2023-05-23
Buyer from PR China
Regular / Long term request
Type:
(PS) Polystyrene foams, (EPS) Expandable polystyrene
Details:
PS泡沫颗粒

2023-05-23
Buyer from PR China
Regular / Long term request
Type:
Pearlescent pigments
Details:
PE珠光 月用2吨
2023-05-23
Buyer from PR China
Regular / Long term request
Type:
Light / UV stabilizers, Antioxidants
Details:
PVC中添加,需要做到抗氧化与发黄
2023-05-23
Buyer from Iran
Regular / Long term request
Type:
Azo pigments, Carbon black, Colour pigments, Colourants, Daylight fluorescent pigments, Dyestuffs, soluble, Iron oxide pigments, Effect pigments, Pearlescent pigments, Phthalocyanine pigments
Details:
Pigments:
R57:1 8mt
Y.12. 12mt
Y.13. 2mt
O.13 5mt
O.34 1mt
R.112 2mt
R.146. 3mt
R.2 8mt
R.53:1 2mt
R.31 2mt
B.15:0 6mt
V.23 1mt
Black 7 7mt
2023-05-23
Buyer from Brazil
Regular / Long term request
Type:
Thermoplastics
Details:
PBS for injection molding.
2023-05-19
Buyer from PR China
Urgent request
Type:
Molds & Dies, Machine vision systems
Details:
LSR 人体植入模具,LSR+TPU,0.2g, overmolding,重点要求熟悉 Microsystem,Manner, Elmet以及部分欧美知名品牌微型注塑模具,冷流道
2023-05-19
Buyer from Egypt
One-time request
Type:
Printing equipment for plastic & rubber products
Details:
I am Ehab younis from Egypt my work is packaging research & development and I research felxo printing machie. as I see in your page there is a machine it's speed about m/m I need width not than one meter and print paper and film also I need to know the all specification about the machine kindly also i need to know the price at last could you send more than machine to be have more than chance to choose the suitable machine. at last I wish it's a good starting to successful new job and i looking forward quick replay.
2023-05-19
Buyer from
Urgent request
Type:
(TPE) Thermoplastic Elastomers, (EPP) Polypropylene-foams
Details:
聚丙烯微孔发泡材料,替代珍珠棉,隔层板使用。
1.描述 PP/SC-CO2 挤出物理发泡片/板,简称 XPP 片/板,是以聚丙烯(PP)为原料,用 二氧化碳作为发泡剂,物理挤出发泡制得的产品。其密度控制在 0.10-0.70 g/cm3 ,厚度 1~20 毫米,具有优异的热稳定性(最高使用温度达 110℃)和高温下制品的尺 寸稳定性,有适宜和柔顺的表面,优异的微波适应性以及易回收性,极佳的可二 次加工性。 2.成分 聚丙烯树脂、CO2。 3.特性 轻质高强 清洁环保 良好的缓冲保护性能 良好的表面保护性能 良好的防水性能 良好的绝热保温性能 良好的耐化学特性 可循环使用 4. 性能(是个pdf文档,表格,就不好上传)
1.描述 PP/SC-CO2 挤出物理发泡片/板,简称 XPP 片/板,是以聚丙烯(PP)为原料,用 二氧化碳作为发泡剂,物理挤出发泡制得的产品。其密度控制在 0.10-0.70 g/cm3 ,厚度 1~20 毫米,具有优异的热稳定性(最高使用温度达 110℃)和高温下制品的尺 寸稳定性,有适宜和柔顺的表面,优异的微波适应性以及易回收性,极佳的可二 次加工性。 2.成分 聚丙烯树脂、CO2。 3.特性 轻质高强 清洁环保 良好的缓冲保护性能 良好的表面保护性能 良好的防水性能 良好的绝热保温性能 良好的耐化学特性 可循环使用 4. 性能(是个pdf文档,表格,就不好上传)
2023-05-19
Buyer from United States of America
Urgent request
Type:
Injection molding machines, general purpose, Injection molding machines, multi-component, Injection molding machines, multi-station, Other injection molding machines
Details:
Mold and Injection Molding machines - electric type , qty 4 - High efficiency
2023-05-19
Buyer from PR China
Regular / Long term request
Type:
(TPE) Thermoplastic Elastomers
Details:
TPU
2023-05-18
Buyer from PR China
Regular / Long term request
Type:
Solid lubricants, Waxes, Lubricants
Details:
树脂,EBS等添加剂
2023-05-18
Buyer from PR China
Regular / Long term request
Type:
Foaming / blowing agents, Processing auxiliaries, Heat stabilizers, Catalysts & accelerators
Details:
稳定剂、促进剂、钙粉,增白剂,钛白粉,发泡剂
2023-05-18
Buyer from Malaysia
Regular / Long term request
Type:
Colour masterbatches, (ABS) Acrylonitrile/ butadiene/ styrene copolymers, (PP) Polypropylene
Details:
PP/ABS. General modified plastics, replacement for ABS757
2023-05-18
Buyer from Pakistan
Regular / Long term request
Type:
(PP) Polypropylene
Details:
Looking for 60+ MFI Polypropylene suitable for thin wall injection moulding. Please share your offers CFR Karachi terms
2023-05-18
Buyer from PR China
Regular / Long term request
Type:
(TPU) Thermoplastic polyurethanes
Details:
MDI、1.4D
2023-05-17