Gluing and sealing technologies are steadily gaining importance as more and more complex components, which are made from avariety of materials, need to be combined.ABB’s Integrated Dispensing Function Package integrates the entire dosing control system with the IRC5 robot controller. Utilizing the IRC5’s internal trajectory motion planning, precise dispensing – up to 96 ml/s at robot speeds of up to 1000 mm/s – is now possible. Using a double doser, it is possible to apply materials as long as desired. Also, it enables the robot to operate up to three times faster than existing solutions.And it reduces complexity by eliminating third party interfaces. Bead related parameters are set directly in the robot’s motion program so that adjusting and optimizing them becomes easier and more economical.

ABB Engineering (Shanghai) Ltd.

Next Generation Nylon 6 CT 5 series vs traditional nylon 6: 1. Stiffness improve 20%; 2. Flowability length increase 30% vs common PA6; 3. Color stability: Delta E<0.2 after 3month. The CT5 series use new technology to improve the performance of current nylon 6 to replace nylon 66.

ADDIVIC POLYAMIDE PLASTIC TECHNOLOGY LTD

SI407H is Nylon 66 with impact modified. 1. toughness for -40C degree;2. high temperature to resist 180 C degree; 3. good process performance; Applications in automotive cable ties, connectors, housing to replace Zytel MT409.

ADDIVIC POLYAMIDE PLASTIC TECHNOLOGY LTD

ADKSTAB LA81 is the NO-alkyl type HALS for PE and PP. ADKSTAB LA81 has excellent solubility to PE/PP and low basicity compared with conventional HALS. Suitable application of ADKSTAB LA81 is agricultural films because it possess excellent light stability under acidic conditions.

ADEKA (CHINA) CO.,LTD.

Model EPD555 recycled PE particles are processed through fine separation, multi-channel pool cleaning, two high-speed centrifuge (new technology) cleaning, remove water, and granulation through the extrusion granulator. Their advantages include reduced impurities, good strength, less crystal point on blown films, etc.

AMOY GARMENTS AND ARTS MANUFACTURING CO.,LTD

Model EPD555 recycled PE particles, through fine separation, multi-channel pool cleaning, two high-speed centrifuge (new technology) cleaning, remove water, and finally through the extrusion granulator granulation, advantages: less impurities, good strength, less blowing film crystal point.

AMOY GARMENTS AND ARTS MANUFACTURING CO.,LTD

HGS-046: Hollow silica, low specific gravity, high sphericity, low dielectric constant. It is especially suitable for high-frequency high-speed CCL(copper clad laminates) for 5G communication base stations, which significantly reduces the dielectric constant of the system. Nano-511: Inorganic nano-powder flame retardant, suitable for low-smoke and halogen-free cable materials, effectively reducing the total heat release of cable materials during combustion; significantly reducing the smoke density during combustion and increasing the light transmittance. It is added in 60~65% of the EVA system and can pass the flame retardant grade of GB31247 B1. SS002D: Chemically porous silica, low specific gravity, high specific surface area, high oil absorption, and narrow particle size distribution. Especially suitable for BOPA, BOPET, BOPP and other film opening agents, 1% ~ 2% addition can significantly improve the film properties.

AnHui Estone Materials Technology Co., Ltd.

Transform the product from powder to beads, especially the Ca-ST, easy to use and no dust.

ANHUI SHAFENG ADVANCED MATERIAL CO.,LTD.

The AL series machine developed by Aoki innovation technology adopts high-speed demolding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mold bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mold and the investment cost in the production are greatly reduced..

AOKI TECHNICAL(FOSHAN)LABORATORY,INC.

The AL series machine developed by Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mould bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mould and the investment cost in the production are greatly reduced.

AOKI TECHNICAL(FOSHAN)LABORATORY,INC.