THE WORLD’S LEADING PLASTICS AND RUBBER TRADE FAIR
National Exhibition and Convention Center (Shanghai), PR China 2022．4．25-28
وكالات السفر ، ووسائل الإقامة والراحة
Exhibitors can log in to “Exhibitor Zone” to access latest show news, Exhibitors’ Manual, Smart Tips for Show Participation, also enjoy exclusive services for exhibitors such as “MyCustomerFirst Services”, submit different “Order Forms” & booth designs, and make use of different promotion tools.
ADVANCED TOOLING TEK (SHANGHAI) CO., LTD.
Plastic mold steel with good toughness, wear resistance and high compressive strength. Nitridable and hard-chrome plateable. Flame-hardenable. Good polishability and suitable for photo-etching. When improving the chemcial composition and production process, the content of sulfur and phosphorus is strictly controlled, the hardness becomes uniform. The polishing and etching performance are thus better than the traditional 1.2711. Improved Tempering Resistance provides more Options for Nitriding or PVD-Coating without sacrificing base-metal hardness. Large compression and injection molds subjected to high wear resistance and mechanical stresses. At higher working hardness, also suitable for processing SMC and GMT, in combination with surface coating if possible.
Remelted hardened and tempered plastic mould steel for the most demanding surface finish requirements. ATT Diamond is based on the successful development of the patented ATT 2738 MOD TS with the following improved characteristics:Further refined composition of ATT Diamond yielding even higher hardness of approximately 40 HRC;Microstructure that is both more homogeneous and finer;Extremely high degree of purity; Mirror-finish polishable using up to 3 μm diamond paste (e.g. surface finish classes SPI - A1 or ISO 1302-N1). Laser hardenable or nitridable as supplied; For optimum productivity and efficiency, ATT Diamond offers up to 45% higher Thermal Conductivity compared to other Lens Mold steel grades. Injection Molds and Compression Dies with the most demanding Surface Finish Requirements for producing items such as transparent Headlight Components, Automotive Trim and Radiator Grille Panels. Ideally suited for interior use, both for polished surfaces and for extra fine-grained surfaces.
ALCAMARE INTERNATIONAL RECYCLING GROUP, S. DE R.L. DE C.V.
HDPE recycled plastic pellet, performance and new material similar, environmental protection, in line with the needs of circular economy, so that plastic products recycling, reduce the damage to the environment, promote sustainable development. Product name: recycled HDPE plastic Color: grayish green Melt index: 1 (10g/min, 190 degrees, 5 kg) Ash content: less than 1% Smooth degree: Smooth Can be directly processed: Yes Tensile strength: 23 Elongation at break: 350 Suitable for pipeline, wood plastic, plastic products production
AMOY ALLIANCE PLASTICS TECHNOLOGY CO.,LTD
Material: High- class Recycled Agr- film pe pellets with ash content less than 2%, Machine: High speed draw- stringe roll bag making machine, can make degradable bag feels soft and smooth.
AMOY COACE PLASTIC TECHNOLOGY CO., LTD.
The COACE BP-1 product is designed to offer a way to solve the low compatibility between different degradable plastics and the blending problem between degradable polyester and bio-base fillers. The strong polar group MAH is grafted onto the molecular chain of BP-1, which has reactivity and strong polarity. The addition of BP-1 can increase the interface affinity between the filler and the polymers, to improve compatibility between different, and help dispersion, thereby improving the overall performance. COACE BP-1 is 100% biodegradable modifiers.
ANHUI ESTONE MATERIAL TECHNOLOGY CO., LTD.
1.This product can effectively improve the oxygen index , the char formation ,Anti - drop performanceand smoke suppression ability of polyolefin material. 2.There is no obvious negative effect on the mechanical properties of the material, the tensile strength and elongation can be improved with the appropriate conditions. 3.It can be used as synegetic flame retardants with halogen-free flame retardants such as magnesium hydroxide, aluminum hydroxide, calcium carbonate, etc. 4.Improve the surface smoothness of extruded products, improve the processing performance. 5.It is non-toxic and environment-friendly, and conforms with EU ROHS directive and REACH regulations
BG-200 is a nano-boehmite with a further reduced particle size, D50 can reach 80nm-150nm, at the same time has a low specific surface area, can be uniformly dispersed in engineering plastics / liquid resins, and can be synergistic with other flame retardant / Synergist filler; unique foreign matter control technology to ensure high purity of the product; typical flake structure, complete crystal; high dehydration temperature up to 350-450, improve processing performance. Applications: Coating of lithium battery separator,CCL,EMC,Plastic ,Rubber, Thermosetting Resin.
ANHUI RESIN TECH CO.,LTD.
Super multi-station cooling solves the problem of wall thickness and low efficiency of tool products.The cam transposition perfectly solves the problem of transposition precision and the long period of conventional automatic transposition.The rectangular shape makes good use of the existing space.The station can be expanded according to the number of color separation, which ensures the good expansion of the transposition cooling module.Heavy-duty track and eccentric bearing perfectly ensure the straightness of motion and the accuracy of all directions of transposition.
ANJIENENG ELECTRIC TECHNOLOGY
Injection molding hopper dryer is an auxiliary equipment for the production of injection molding machine. It is very economical and effective for drying plastic raw materials. It is simple for drying wet plastic raw materials in the process of packaging, transportation or recycling. The high efficiency and energy saving hopper dryer can directly replace the ordinary hopper. Compared with the ordinary hopper, it has advantages of more than 30% energy saving rate, beautiful appearance, low surface temperature, durability and higher drying efficiency.
AOKI TECHNICAL (FOSHAN) LABORATORY, INC.
The AL series machine developed by Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mould bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mould and the investment cost in the production are greatly reduced.