Plastic mold steel with good toughness, wear resistance and high compressive strength. Nitridable and hard-chrome plateable. Flame-hardenable. Good polishability and suitable for photo-etching. When improving the chemcial composition and production process, the content of sulfur and phosphorus is strictly controlled, the hardness becomes uniform. The polishing and etching performance are thus better than the traditional 1.2711. Improved Tempering Resistance provides more Options for Nitriding or PVD-Coating without sacrificing base-metal hardness. Large compression and injection molds subjected to high wear resistance and mechanical stresses. At higher working hardness, also suitable for processing SMC and GMT, in combination with surface coating if possible.

ADVANCED TOOLING TEK (SHANGHAI) CO., LTD.

Remelted hardened and tempered plastic mould steel for the most demanding surface finish requirements. ATT Diamond is based on the successful development of the patented ATT 2738 MOD TS with the following improved characteristics:Further refined composition of ATT Diamond yielding even higher hardness of approximately 40 HRC;Microstructure that is both more homogeneous and finer;Extremely high degree of purity; Mirror-finish polishable using up to 3 μm diamond paste (e.g. surface finish classes SPI - A1 or ISO 1302-N1). Laser hardenable or nitridable as supplied; For optimum productivity and efficiency, ATT Diamond offers up to 45% higher Thermal Conductivity compared to other Lens Mold steel grades. Injection Molds and Compression Dies with the most demanding Surface Finish Requirements for producing items such as transparent Headlight Components, Automotive Trim and Radiator Grille Panels. Ideally suited for interior use, both for polished surfaces and for extra fine-grained surfaces.

ADVANCED TOOLING TEK (SHANGHAI) CO., LTD.

Material: High- class Recycled Agr- film pe pellets with ash content less than 2%, Machine: High speed draw- stringe roll bag making machine, can make degradable bag feels soft and smooth.

AMOY ALLIANCE PLASTICS TECHNOLOGY CO.,LTD

The COACE BP-1 product is designed to offer a way to solve the low compatibility between different degradable plastics and the blending problem between degradable polyester and bio-base fillers. The strong polar group MAH is grafted onto the molecular chain of BP-1, which has reactivity and strong polarity. The addition of BP-1 can increase the interface affinity between the filler and the polymers, to improve compatibility between different, and help dispersion, thereby improving the overall performance. COACE BP-1 is 100% biodegradable modifiers.

AMOY COACE PLASTIC TECHNOLOGY CO., LTD.

The AL series machine developed by Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mould bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mould and the investment cost in the production are greatly reduced.

AOKI TECHNICAL (FOSHAN) LABORATORY, INC.

The high-performance hybrid ALLROUNDER 470 H with a clamping force of 1,000 kN is equipped with 48 cavities and full hot runner mould from Jestar mold. The machine will produce pipette tips with 0.49g part weight in 6 seconds. The excellent cooling design ensures stable mold temperature to achieve the efficient production and guarantees the parts quality. This turnkey solution includes fully automation from WELLLIH robot for part removal, sorting, quality check and packaging. This unmanned operation avoids the pollution. Like all machines exhibited at the stand, this ALLROUNDER is networked with the ARBURG host computer system (ALS).ARBURG's primary focus is on digitalisation and circular economy – the company is a leader in the industry in these fields thanks to its arburgXworld and arburgGREENworld programs.

ARBURG (Shanghai) Co., Ltd.

The pressure&vacuum forming machine "FJ" equips Quick response Heater, which realize the echo and stable production with precise sheet temperature control and quick heating speed. This heater can heat up to 600℃ by 10 seconds. Also FJ has chain rail expanding function, which will prevent the draw-down. The trimming machine "PJ" uses the steel rule, whihch will reduce the mold cost. Further, the mold change will done by opening the door of the machine side, which will make the operation easier. Both machine equips digital touch panel for operation and AC servomotor to realize the high speed and stable production.

ASANO LABORATORIES CO., LTD.

The winder AW90 is a newly developed machine as per customer's request, aiming at winding brittle fibers, such as pith based carbon fiber, silicon carbide fiber, ceramic fiber, basalt fiber, etc. The theory of traditional winder is winding the fiber onto the spindle through the traverse motion of the fiber delivery head. It is ok for winding common fibers. But for some special fibers that are very brittle, the big winding angle obviously hurts the fiber and even causes fiber breakage. Therefore, we specially developed the winder AW90. Its delivery head is fixed during winding, instead the spindle is traversing slowly to achieve zero winding angle, which perfectly solve the winding problems of brittle fibers. The bobbin shape formed by this winder is perfect. It has been sold to several universities in bulk and has been well received by the users.

ATA MACHINERY（GUANGZHOU) CO., LTD.

1. Convenient charging solution that is robust enough to house sophisticated components and sensors combining 5G, IoT and AI capabilities, as well as durable enough for the outdoors. The charger made of high-performance plastics instead of metal is lighter in weight, hence, consuming less energy. It enables the charger’s energy-efficient operation. 2. MobiPOWER’s wireless charging concept also required more advanced material considerations and design support by BASF’s Creation Center to enable more reliable and highest safety standards charging.3. Ultramid and Ultradur in the body housing provide good surface finish, better scratch, chemical resistance, and colorability. BASF’s Ultramid Advanced N for MobiPOWER’s LED lighting offers good surface finish and aging performance, as well as low moisture absorption. The innovative material solution enables freedom of design as it is moldable and is easy to process and color. 4. Charging and wireless charging of eMobility and electronic devices.

BASF (CHINA) CO., LTD.

The new-type label scrapping machine has an improved internal structure, which keeps the label scrapping rate above 95%, and bottle breaking rate below 6%, extends the service life of scrapping blades with patented to 9000 tons, CNC processing to ensure structure accuracy and improve operation stability.It plays a key role in the PET bottle recycling process which improves rPET flakes quality output.

BORETECH ENVIRONMENTAL ENGINEERING CO., LTD.