THE WORLD’S LEADING PLASTICS AND RUBBER TRADE FAIR
National Exhibition and Convention Center (Shanghai), PR China 2022．4．25-28
Información de la exposición
Agencia de viajes y alojamiento
Inscríbase como expositor
Exhibitors can log in to “Exhibitor Zone” to access latest show news, Exhibitors’ Manual, Smart Tips for Show Participation, also enjoy exclusive services for exhibitors such as “MyCustomerFirst Services”, submit different “Order Forms” & booth designs, and make use of different promotion tools.
Conviértete en visitante
Servicio para el visitante
Información de la exhibición
Medios de comunicación
ADVANCED TOOLING TEK (SHANGHAI) CO., LTD.
Plastic mold steel with good toughness, wear resistance and high compressive strength. Nitridable and hard-chrome plateable. Flame-hardenable. Good polishability and suitable for photo-etching. When improving the chemcial composition and production process, the content of sulfur and phosphorus is strictly controlled, the hardness becomes uniform. The polishing and etching performance are thus better than the traditional 1.2711. Improved Tempering Resistance provides more Options for Nitriding or PVD-Coating without sacrificing base-metal hardness. Large compression and injection molds subjected to high wear resistance and mechanical stresses. At higher working hardness, also suitable for processing SMC and GMT, in combination with surface coating if possible.
Remelted hardened and tempered plastic mould steel for the most demanding surface finish requirements. ATT Diamond is based on the successful development of the patented ATT 2738 MOD TS with the following improved characteristics:Further refined composition of ATT Diamond yielding even higher hardness of approximately 40 HRC;Microstructure that is both more homogeneous and finer;Extremely high degree of purity; Mirror-finish polishable using up to 3 μm diamond paste (e.g. surface finish classes SPI - A1 or ISO 1302-N1). Laser hardenable or nitridable as supplied; For optimum productivity and efficiency, ATT Diamond offers up to 45% higher Thermal Conductivity compared to other Lens Mold steel grades. Injection Molds and Compression Dies with the most demanding Surface Finish Requirements for producing items such as transparent Headlight Components, Automotive Trim and Radiator Grille Panels. Ideally suited for interior use, both for polished surfaces and for extra fine-grained surfaces.
AMOY COACE PLASTIC TECHNOLOGY CO., LTD.
The COACE BP-1 product is designed to offer a way to solve the low compatibility between different degradable plastics and the blending problem between degradable polyester and bio-base fillers. The strong polar group MAH is grafted onto the molecular chain of BP-1, which has reactivity and strong polarity. The addition of BP-1 can increase the interface affinity between the filler and the polymers, to improve compatibility between different, and help dispersion, thereby improving the overall performance. COACE BP-1 is 100% biodegradable modifiers.
AOKI TECHNICAL (FOSHAN) LABORATORY, INC.
The AL series machine developed by Aoki innovation technology adopts high-speed demoulding method to mold and realize the cycle efficiency of rapid molding. The production will greatly increase by shortening injection, cooling and blow molding time, and the improving plasticization, even if the number of cavity is the same. The optimization of the volume of the machine and mould bring down the production cost and the area occupied by the equipment. At the same time, the first investment cost of the machine and mould and the investment cost in the production are greatly reduced.
ASANO LABORATORIES CO., LTD.
The pressure&vacuum forming machine "FJ" equips Quick response Heater, which realize the echo and stable production with precise sheet temperature control and quick heating speed. This heater can heat up to 600℃ by 10 seconds. Also FJ has chain rail expanding function, which will prevent the draw-down. The trimming machine "PJ" uses the steel rule, whihch will reduce the mold cost. Further, the mold change will done by opening the door of the machine side, which will make the operation easier. Both machine equips digital touch panel for operation and AC servomotor to realize the high speed and stable production.
BOROUGE PTE LTD
1- Anbiq™ is an enhanced LLDPE resin produced using the proprietary Borstar® bimodal technology, combined with smart catalyst design and comonomer incorporation. AnbiqTM offers a unique balance of mechanical properties, sealing performance, easy processing and good optics in flexible film applications. Anbiq™ delivers fit for purpose performance and outstanding benefit-to-cost ratio for converters and value chain partners whilst contributing to the circular economy and ensuring sustainability.2- Borouge has developed multiple successful solutions of fully recyclable and circular packages, enabled with differentiated PE and PP products Anteo™, Anbiq™ and Borstar®. The solutions have been commercialized including a full PE solutions to replace PET in detergent pouches, a new e-commerce solution containing both virgin PE and high amounts of post-consumer recyclate, and many others, all without compromising the performance, efficiency and aesthetics requirements for the package.
Borouge offers a comprehensive range of pre-compounded PE grades with a track record of more than 20 years in gas and water pipe applications: HE3490-LS (PE100 Black), HE3490-LS-H (PE100 Black RC), ME3440 (PE80 Black), HE3492-LS-H (PE100 Orange) and ME3441 (PE80 yellow). To meet market demands of large diameter and thick-wall PE pipes, Borouge has developed HE3490-ELS-H (Extra Low Sag). BorSafe™ HE3490-ELS-H is a PE100 grade with high slow crack resistance, high corrosion resistance and superior low sag performance. Designed to improve and simplify the production of thick-wall HDPE pipes, HE3490-ELS-H is produced using the unique Borstar® technology that balances enhanced processability with mechanical properties to enable optimal pipe extrusion and significant material savings. This is especially suitable for the increasingly challenging dimensions of large diameter and thick-wall HDPE pipes in utilities and industrial projects. This innovative grade can be used for water transmission pipelines, water intake and outfall for thermal power plants, desalination plants, water treatment and supply for mining etc.
CHINA JUSHI CO.,LTD.
Compofil®-PP is a kind of thermoplastic prepreg made from continuous fiberglass and PP resin. It is specially designed to manufacture high performance PP composite components directly with no need for extra resin. 354A is a part of Compofil product ,It is suitable for winding processes, widely applied in gas cylinder, FRP pipe, storage tanks and so on.
CHINA VISION(GROUP) CO., LIMITED
Our New Scientific Mini Single-Layer Film and Sheet Line Type LMCR-150 has been developed to fill the gap of supplying a very compact and economic cast film and sheet line for laboratory applications. This line is well suited for further developments and quality controls of plastic films and thin sheets. The line comprises our new MINI sizes extruder, coat-hanger type die, chill roll with downstream nip rolls and wind-up. The whole line is mounted on a bench type subcabinet occupying a minimum floor space of 1.5m x 0.7m and height of 1.2m. The subcabinet has a sliding base to hold all the electric components inside.
DALIAN ALTMA INDUSTRY CO., LTD.
Dalian ALTMA Industry (the sino-Japanese manufacturer in China) was founded , which is specialized in flexible packaging machines manufacturer and inventory，With the advanced machining capacity in China, ALTMA imported around 60 sets machining centers from Japan, U.S., and Germany.Running top 500m/min printing speed in China by applying the high-accuracy direct connection technology that is developed together with Sumitomo, no gear box connected; Double layer shaft technology perfectly solves the ink splash problem.The 5 faces insulation dryer reduces the energy loss.